Navilight 360° 2NM w/Suction base
The “Navilight 360° 2NM w/Suction base” combines two successful Navisafe products into one – the Navilight 360° 2NM and the Bendable Suction mount.
The Navilight 360° 2NM w/Navimount Suction base is the ready to go Navigation light solution to be securely mounted on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat. Furthermore the suction cup can be used to hold a GoPro® camera (Hero / 2 / 3) when no light is needed – the mount is fully compatible!
Navisafe supplies a 3M VHB self-adhesive “mounting pad” to securely attach the light on abrasive surfaces and the innovative curved “landing pad” to attach the light on inflatable boats.
Examples of usage, based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs.
On a power-driven vessel underway of 12 meters or more in length but less than 50 meters in length:
- Sternlight
- All-round white light
On a power-driven vessel underway of less than 12 meters in length:
- Masthead light
- Sternlight
- All-round white light
On a power-driven vessel underway of less than 7 meters in length whose maximum speed does not exceed 7 knots:
- All-round white light
Rowing / Paddle vessels
- All-round white light
Anchored vessels and vessels aground
Anchor lights must always be shown from sunset to sunrise.
- All-round white light
- USCG Approval, 2 Nautical Miles
- 5 Modes: 360° All-round light, 225° Masthead light,
135° Sternlight, Flashing light, Anchoring light, Cabin
light - includes dual function suction mount – holds Navilight 360° 2NM w/Suction base or GoPro®/Action camera or any other
accessory utilizing the mounting bracket - floats light facing up
- submersible to 20 m
- corrosion resistant
- 3M VHB self-adhesive “mounting pad” to securely
attach the light on abrasive surfaces - 3M VHB self-adhesive curved “mounting pad” to
securely attach the light on inflatable boats - neoprene stowawaybag
- powered by three AAA batteries (not included)
- Size: H = 95 mm, Ø = 68 mm
- Weight (net): 139 g
- Model name: Navilight 360° 2NM w/Suction base
- Model nr.: 041
- EAN Barcode: 7090017580612
Modes / approximate burn time:
- 16 green / red / white LED, 360° TriColor lantern / 12hrs
- 10 green / red LED, 225° Bi-Color sidelight / 20hrs
- 5 green or 5 red LED, 112,5° sidelight / 38hrs
- 6 white LED, 135° Sternlight / 32hrs
The Navilight 360° 2NM w/Suction base differs from the Navilight 360° 2NM through its mounting system – while the Navilight 360° 2NM is supplied with the Navisafe magnetic mounting system the Navilight 360° 2NM w/Suction base is directly fixed to a suction cup mount. It can be easily mounted on all flat and smooth surfaces like the outboard engine, the steering console, the windshield or any place on the hull where the lights are seen best. Navisafe supplies a 3M VHB self-adhesive “landing pad” to securely attach the light on abrasive surfaces and a curved “landingpad” to attach the light on inflatable boats.
Please note that suction mounts are most suitable for short-term mountings – changes in temperature and humidity may make them lose their grip.
